You can draw attention to parts of a presentation by zooming into a portion of
the im
age and enlarging it on the screen.
is feature is unavailable if the Scale setting in the projector's Image
men
u is enabled.
a
Press the [E-Zoom] + button on the remote control.
You see a crosshair on the screen indicating the center of the zoom area.
b
Use the following buttons on the remote control to adjust the zoomed
image:
•
U
se the arrow buttons to position the crosshair in the image area you
want to zoom into. To move the crosshair diagonally, press any pair of
adjacent arrow buttons at the same time.
•
Press the [E-Zoom] + button repeatedly to zoom into the image area.
Press and hold the [E-Zoom] + button to zoom in more quickly.
•
To pan around the zoomed image area, use the arrow buttons.
•
To zoom out of the image, press the [E-Zoom] – button.
•
To ret
urn to the original image size, press [Esc].
e enlarged image is projected and the enlargement ratio is displayed on
the screen.
You can enlarge the selected area to between one to four times in 25
incremental steps.
When projecting images from an Epson document camera using a USB
connection, you can enlarge the selected area from one to eight times its
size in 57 incremental steps.
Zooming Images
111
To Next Page
Loading...
