Epson EB-810E - Saving a User Pattern

ere are four types of patterns pre-registered in the projector, such as ruled
lines an
d grid patterns. You can project these patterns to aid in presentations
using the Pattern Display settings.
You can also save the image that is currently being projected as a User Pattern.
•
Once yo
u save a User Pattern, the pattern cannot be returned to the
factory default.
•
You cannot save content that is protected by HDCP.
a
Project the image you want to save as the User Pattern.
b
Press the [Menu] button, select the M
anageme
nt menu, and press [Enter].
c
Select User Pattern and press [Enter].
Yo
u see a prompt asking if you want to use the displayed image as a User
Pattern.
Adjustments such as Geo
metry Correction, E-Zoom, Aspect,
or Image Shi are temporarily cancelled when you select User
Pattern.
d
Select Y
es and press [Enter].
Yo
u see a prompt asking if you want to save the image as the User Pattern.
e
Select Yes and press [Enter].
Yo
u see a completion message.
f
Select the Displ
ay menu and press [Enter].
Saving a User Pattern
114