If you want to change the grid color for visibility, press [Esc], then
sele
ct a dierent Pattern Color setting in the Point Correction
menu.
h
Use the arrow buttons to move to the point you want to correct, then press
[Enter].
i
Use the arrow buttons to correct distortion as necessary.
j
To correct any remaining points, press [Esc] to return to the previous
scre
en, then repeat steps 8 and 9.
k
When you are nish
ed, press [Esc].
•
To sav
e the current shape of an image you have adjusted, select Save
Memory. You can save up to three image shapes in the memory.
s Installation > Geometry Correction > Memory > Save Memory
•
To reset the Point Correction settings to their original positions, select
Reset on the Point Correction screen.
g
Related Links
•
"Co
rrecting the Image Shape with Quick Corner" p.62
Loading Image Shape Setting from Memory
You can load the image shape settings you selected and saved to the projector's
memo
ry and apply them to the current image.
a
Turn on the projector and display an image.
b
Hold down the [Num] button on the remote control, and then press the
n
umer
ic button (1, 2, or 3) that matches the number of the saved setting.
c
When you have nish
ed loading the settings, follow the on-screen
instructions.
Image Shape
69
To Next Page
Loading...
