Network Menu - Projector Control Menu
Sett
ings on the Projector Control menu let you select settings for controlling
the projector over a network.
Setting Options Description
Command
Comm
unication
Protected
Compatible
Selects the authentication method for
command communication.
When using Command Communication,
set the Monitor Password or the Web
Control Password.
s Network > Network Settings > Web
Control Password
Set to Protected when performing a
digest authentication using Web Control
Password. You need to install the
latest version of the Epson Projector
Management soware.
Set to Compatible when performing
plain text authentication using the
Monitor Password (up to 16
alphanumeric characters long).
Select Compatible when monitoring
projectors with a switcher and a system
controller or using Epson Projector
Management ver.5.30 or earlier.
Web API Settings Web API Select On to enable the Web API
fun
ction.
Setting Options Description
Authentication Selects the security for your projector to
use d
uring Web API communications.
Open: Security is not set.
Digest: Communication is performed
using API authentication (Digest
authentication).
See the Web API Specications for
Projectors for details.
Basic Control On
O
Set to On to monitor and control the
pr
ojector using Basic Control in Epson
Web Control.
is setting is only displayed when
Content Playback is set to O in the
projector's Operation menu.
Remote Password Up to 8
alph
anumeric
characters
(do not use * :
spaces)
Enter a password to access the
projector using Basic Control in Epson
Web Control. (e user name is
EPSONREMOTE. No password is set by
default.)
PJLink On
O
Set to On to enable the PJLink
no
tication function.
PJLink Password Up to 32
alph
anumeric
characters
(do not use spaces
and any symbols
other than @)
Enter a password for using the PJLink
protocol for projector control.
You must set the PJLink Password when
using the PJLink function for the rst
time.
Projector Network Settings - Network Menu
214
To Next Page
Loading...
