Epson EB-810E - Adjusting RGBCMY; Scaling an Image

f
Use the arrow buttons to move the point.
g
To continue to move another point, press [Esc] and then repeat steps 5
an
d 6.
h
T
o ad
just another boundary line, press [Esc] until the screen shown in step
3 is dis
played.
i
When you are nish
ed, press [Menu].
Adjusting RGBCMY
You can adjust the Hue
, Saturation, and Brightness settings for R (red), G
(green), B (blue), C (cyan), M (magenta), and Y (yellow) color components.
Before you begin, turn on all the projectors so you can select color tone settings
that match on the unied screen.
See "Adjusting the Hue, Saturation, and Brightness" for details.
g
Related Links
•
"Adjusting the Hue, Saturation, and Brightness" p.82
Scaling an Image
You can project the same image from multiple projectors and use the Scal
e
feature to crop and combine them into one unied image area.
a
Input the image signal to display the image.
Using Multiple Projectors
128