e indicators on the projector indicate the projector status and let you know
wh
en a problem occurs. Check the status and color of the indicators and then
refer to this table for a solution.
•
If th
e indicators display a pattern not listed in the table below, turn the
projector o, unplug it, and contact Epson for help.
•
When the Indicators setting is set to O in the projector's Operation
menu, all indicators are o under normal projection conditions.
A
WLAN (wireless LAN) indicator
B
Temp (temperature) indicator
C
Laser indicator
D
Status indicator
E
On/Standby (power) indicator
Projector status
Indicator and status Problem and solutions
Power: Lit blue
Stat
us: Lit blue
Laser: O
Temp: O
Normal operation.
Power: Lit blue
Stat
us: Flashing blue
Laser: O
Temp: O
Warming up, shutting down, or cooling down.
When warming up, wait about 30 seconds for an image to
appear.
All buttons are disabled during warm-up, shutting down,
and cooling down.
Power: Lit blue
Stat
us: O
Laser: O
Temp: O
Standby, sleep mode, or monitoring.
When you press the power button, projection starts.
Power: Flashing blue
Stat
us: O
Laser: O
Temp: O
Preparing for monitoring or quick startup mode. All
features are disabled.
Power: Indicator status
varies
St
atus: Flashing blue
Laser: Flashing orange
Temp: Indicator status
varies
Refresh Mode is in progress.
s Management > Refresh Mode
Projector Indicator Status
244
To Next Page
Loading...
