Epson EB-810E - Configuring Tiling; Blending the Image Edges

Conguring Tiling
Yo
u can congure tiling manually.
a
Turn on the projector.
b
Press the [Menu] button, select the M
ul
ti-Projection menu, and press
[Enter].
c
Select Tiling > Column and press [Enter].
d
Se
lect the number of columns you are setting up as the Col
umn setting.
en select Return and press [Enter].
e
Repeat the previous steps with each projector you are setting up before
cont
inuing with the next step.
f
Select Column Order and press [Enter].
g
Se
lect the position of each projected image as the Col
umn Order setting.
Layout the screens from le to right, starting with 1 on the le. en press
[Enter].
h
Repeat the previous step with each projector you are setting up before
co
n
t
inuing with the next step.
i
Select the input signal to display an image.
Aer p
erforming the steps here, adjust the images for any gaps and dierences
in color.
Blending the Image Edges
You can use the projector's Edge Blending feature to create a seamless image
fro
m multiple projectors.
Using Multiple Projectors
122