If you are projecting from a table or other at surface an
d the image is too high
or low, you can adjust the image height using the projector's adjustable feet.
e larger the angle of tilt, the harder it becomes to focus. Locate the projector
so that it only needs to be tilted at a small angle.
a
Turn on the projector and display an image.
b
Rotate the rear feet to adjust the image height.
A
Extend the rear foot
B
Retract the rear foot
If the projected image is unevenly rectangular, you need to adjust the image
shap
e.
g
Related Links
•
"Image Shape" p.61
Adjusting the Image Height
57
To Next Page
Loading...
