Epson EB-810E - Displaying a Test Pattern

You can display a test pattern to adjust the projected image without connecting
a comp
uter or video device.
•
e test p
attern's shape is determined by the Screen Type setting. Be
sure to set the correct screen type before adjusting with the test pattern.
•
To set menu items that cannot be set while the test pattern is being
displayed or to ne-tune the projected image, project an image from
the connected device.
a
Turn on the projector.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Installation menu and press [Enter].
d
Select Test Pattern and press [Enter].
Displaying a Test Pattern
58