Epson EB-810E - Selecting Wireless Network Settings in Windows; Selecting Wireless Network Settings in Mac; Setting up Wireless Network Security for Simple AP Mode; Computers

q
Press the [LAN] button on the remote control.
e wire
less network settings are complete when you see the correct IP
address on the network information screen.
When you have nish
ed making wireless settings for your projector, you need to
select the wireless network on your computer. en start the network soware
to send images to your projector through a wireless network.
g
Related Links
•
"Using the Displayed Keyboard" p.189
Selecting Wireless Network Settings in Windows
Before connecting to the projector, select the correct wireless network on your
co
m
p
uter.
a
To access your wireless utility sowar
e, click the network icon on the
Windows taskbar.
b
When connecting to devices over a wireless network access point, make
sure W
i-Fi is turned on and select the network name (SSID) of the
network the projector is connecting to.
c
Click Connect.
Selec
ting Wireless Network Settings in Mac
Before connecting to the projector, select the correct wireless network in Mac.
a
Click the Wi-Fi icon on the menu bar at the top of the screen.
b
When connecting to devices over a wireless network access point, make
s
ure W
i-Fi is turned on and select the network name (SSID) of the
network the projector is connecting to.
Setting Up Wireless Network Security for Simple AP
Mode
You can set up security for your projector to use on a wireless network with
simple AP m
ode. You can use WPA2-PSK security.
Contact your network administrator for guidance on entering the correct
information.
a
Press the [Menu] button, select the N
et
work menu, and press [Enter].
b
Select Network Settings and press [Enter].
Wireless Network Projection
147