Epson EB-810E - Selecting Password Security Types

b
Select Password and press [Enter].
You see the prompt Change the p
assword?.
c
Select Yes and press [Enter].
If you select No, t
he Password Protection setting menu is displayed
again.
d
Hold down the [Num] button on the remote control and use the numeric
b
ut
tons to set a four-digit password.
e password displays as **** as it is entered. A conrmation prompt is
dis
played when you enter the fourth digit.
e
Enter the password again.
You s
ee the message Password accepted. If you enter the password
incorrectly, a message is displayed prompting you to re-enter the
password.
f
Press [Esc] to return to the menu.
g
Make a note of the password and keep it in a safe place.
Selecting Password Security Types
A
er
s
etting a password, you see this menu, allowing you to select the password
security types you want to use.
If you do not see this menu, hold down the [Freeze] button on the remote
co
n
t
rol for 5 seconds until the menu appears.
•
To prevent unauthorized use of the projector, set the Power On Protection
setting to On.
•
To prevent changes to the projector's settings, select the Menu Protection
setting, press [Enter], and select the options as necessary.
•
To prevent changes to the User's Logo screen or related display settings, set
the User's Logo setting to On.
•
To prevent changes to the projector's schedule settings, set the Schedule
setting to On.
•
To prevent changes to projector's network settings, set the Network setting
to On.
You can attach the password protect sticker to the projector as an additional
the deterrent.
Projector Security Features
132