Epson EB-810E - Connecting Multiple Projectors of the Same Model; Projecting One Large Unified Image in a Daisy-Chain Connection

You can create one large unied im
age from multiple projectors.
You can connect multiple projectors using either of the following methods:
daisy-chain connection or distributor connection. You can connect up to four
projectors in a daisy-chain connection.
Attention
When in
stalling the projectors, make sure hot air from the exhaust vent does not go
into the air intake vent of another projector.
g
Related Links
•
"Pr
ojecting One Large Unied Image in a Daisy-Chain Connection" p.38
Projecting One Large Unied Image in a Daisy-Chain
Connection
a
Connect the projector to the computer using the HDMI cable, and then
conne
ct the HDMI1 port and HDMI Out port of the projectors using the
HDMI cable.
•
e image i
s output from the HDMI Out port only when HDMI1
is selected as the image source.
•
If you are connecting projectors in a daisy-chain, connect them
as shown below.
b
Press the [Menu] button on the control panel or remote control.
c
Select the C
olor Mode setting to Multi-Projection in the projector's
Image
menu for all of the projectors.
d
Select the necessary HDMI Lin
k setting in the projector's Signal I/O
menu. See the following list for example settings when connecting three
projectors.
Setting Item
A B C
First projector
t
o co
nn
ect to
the device
Projectors in the
middle
Terminal
projector
HDMI Out
Pow
er Link
On On On
HDMI Out
Termin
al End
O O On
Connecting Multiple Projectors of the Same Model
38