Epson EB-810E - Network Menu - Wireless LAN Menu

Setting Options Description
Simple AP On
O
Set to On to enable simple access point
mo
de for direct connection between your
projector and input devices. Make sure
you are also doing the following:
•
Using Quick Connection Mode of
Epson iProjection
•
Using Screen Mirroring connection
Setting is only displayed when Wireless
LAN Power is set to On in the projector's
Management menu.
SSID Automatically
assign
ed SSID
Displays the SSID of the projector for
selection on your device in simple AP
connections.
Security WPA2-PSK Displays the security type for simple AP
conne
ctions.
Passphrase Various
pass
phrases from 8
to 63 characters
Enter the passphrase of the projector
for entry on your device in simple AP
connections.
You must set the Passphrase when using
simple AP mode for the rst time.
Wireless LAN Sys. 802.11ac (Wi-Fi 5)
802.11n (Wi-Fi 4)
Sets t
he communication method between
the projector and the mobile device.
e available methods vary depending on
countries and regions.
Channel Various channels
availab
le
Sets the frequency band (channel) using
in simple AP connections.
Wireless LAN — See the Wireless LAN menu table for
detai
ls.
Wired LAN — See the Wired LAN menu table for
detai
ls.
Setting Options Description
Mail Notication — Se
e the Mail Notication menu table for
details.
Projector Control — See the Projector Control menu table for
detai
ls.
Network Projection — See the Network Projection menu table
fo
r details.
g
Related Links
•
"Net
work Menu - Wireless LAN Menu" p.210
•
"Network Menu - Wired LAN Menu" p.212
•
"Network Menu - Mail Notication Menu" p.213
•
"Network Menu - Projector Control Menu" p.214
•
"Network Menu - Network Projection Settings" p.216
Network Menu - Wireless LAN Menu
Settings on the Wireless LAN menu let you select the wireless LAN settings.
•
Turn o
n the Wireless LAN Power setting in the projector's
Management menu.
•
If you did not install an optional wireless LAN module, turn o the
Simple AP setting to enable you to select wireless LAN settings.
When connecting to a wireless network, it is strongly recommended that you set
sec
urity. When setting security, follow the instructions from the administrator
of the network system you want to connect to.
WPA is an encryption supports AES encryption methods.
Projector Network Settings - Network Menu
210