Epson EB-810E - Projector Security Features; Password Security Types; Setting a Password

You can secure your projector to deter the
or prevent unintended use by
setting up the following security features:
•
Password security to prevent people who do not know the password from
using the projector, and prevent changes to the startup screen and other
settings.
is acts as an anti-the function as the projector cannot be used even if it is
stolen, and you can limit who can use the projector.
•
Button lock security to block operation of the projector using the buttons on
the control panel.
is is useful at events or shows when you want to deactivate all buttons
during projection or at schools when you want to limit button operation.
•
Security cabling to physically secure the projector in place.
g
Related Links
•
"Password Security Types" p.131
•
"Locking the Projector's Buttons" p.133
•
"Installing a Security Cable" p.134
Password Security Types
You can set up the following types of password security using one shared
password:
•
Power On Protection prevents anyone from using the projector without rst
entering a password. When plugging the power cord and turning on the
projector at rst time, you must enter the correct password. is also applies
to Direct Power On and Auto Power On.
•
Menu Protection of User's Logo prevents anyone from changing the custom
screen displayed when the projector turns on or receives an input signal. e
custom screen deters the by identifying the projector's owner.
•
Menu Protection of Schedule prevents anyone from changing the projector's
schedule settings.
•
Men
u Protection of Network prevents anyone from changing the projector's
Network settings.
g
Related Links
•
"Setting a Password" p.131
•
"Selecting Password Security Types" p.132
•
"Entering a Password to Use the Projector" p.133
Setting a Password
For t
he rst time you use the projector, you must set a password.
No password is set by default. You must set a password.
a
Hold down the [Freeze] button on the remote control for about 5 seconds.
You see the Password Protection setting menu.
•
I
f n
o p
assword has been set, a screen prompting you to set
a password is displayed before you can view the Password
Protection setting menu.
•
If Password Protection is already enabled, you must enter the
correct password to display the Password Protection setting
menu.
Projector Security Features
131