c
Press the power button on the control panel or remote control to turn on
the p
rojector.
e projector beeps and the status indicator ashes blue as the projector
warms up. Once the projector is warmed up, the status indicator stops
ashing and turns blue.
•
When y
ou turn on the projector for the rst time, the initial
setup wizard is displayed. Make the Projection, Language, and
Date & Time settings using the arrow and [Enter] buttons on
the control panel or remote control. Next, turn on the Quick
Startup setting to start the projector faster if necessary. Note that
enabling this item increases standby power consumption. Finally,
adjust the shape and position settings for the projected image as
necessary.
•
You can also select the Quick Startup setting in the projector's
Operation menu.
Try the following if you do not see a projected image.
•
Turn o
n the connected computer or video device.
•
Change the screen output from the computer when using a laptop computer.
•
Insert a DVD or other video media, and press play (if necessary).
•
Press the [Source] button on the control panel or the [Source Search] button
on the remote control to detect the source.
•
Press the button for the desired video source on the remote control.
•
If the Home screen is displayed, select the source you want to project.
Warning
•
Nev
er look into the projector lens when the light source is on. is can damage
your eyes and is especially dangerous for children.
•
When turning on the projector at a distance using the remote control, make sure
there is no one looking into the lens.
•
If the light from the projector is blocked, the area on which the light shines
becomes hot which could cause it to melt, burn, or start a re. Also, the lens may
get hot due to the reected light which could cause the projector to malfunction.
To stop projection, use the A/V Mute function, or turn o the projector.
•
When t
he Direct Power On setting is set to On in the projector's
Operation menu, the projector turns on as soon as you plug it in. Note
that the projector also turns on automatically in cases such as recovery
from a power outage.
•
If you select a specic port as the Auto Power On setting in the
projector's Operation menu, the projector turns on as soon as it detects
a signal or cable connection from that port.
g
Related Links
•
"Ho
me Screen" p.45
•
"Projector Feature Settings - Operation Menu" p.200
Home Screen
e Home screen feature allows you to easily select an image source and
access u
seful functions. You can display the Home screen by pressing the
[Home] button on the control panel or remote control. e Home screen is
also displayed when you turn on the projector and no signal is being input.
Turning On the Projector
45
To Next Page
Loading...
