Check the solutions in these sections if you have any problems with projected
images o
r sound.
g
Related Links
•
"Solutions When No Image Appears" p.247
•
"Solutions When Image is Incorrect Using the USB Display Function" p.248
•
"Solutions When "No Signal" Message Appears" p.248
•
"Solutions When "Not Supported" Message Appears" p.249
•
"Solutions When Only a Partial Image Appears" p.249
•
"Solutions When the Image is not Rectangular" p.250
•
"Solutions When the Image Contains Noise or Static" p.250
•
"Solutions When the Image is Fuzzy or Blurry" p.250
•
"Solutions When the Image Brightness or Colors are Incorrect" p.251
•
"Solutions When an Aerimage Remains on the Projected Image" p.251
•
"Solutions to Sound Problems" p.252
•
"Solutions When Image File Names are not Displayed Correctly in PC Free"
p.252
•
"Solutions When You Cannot Project Images Using the PC Free Feature"
p.252
Solutions When No Image Appears
If no image appears, try the following solutions:
•
Press the [A/V Mute] button on the remote control to see if the image was
temporarily turned o.
•
Make sure all necessary cables are securely connected and the power is on for
the projector and connected video sources.
•
Press the projector's power button to wake it from standby or sleep mode.
Also, check if the connected computer is in sleep mode or displaying a blank
screen saver.
•
If th
e projector does not respond when you press the control panel buttons,
the buttons may be locked for security. Unlock the buttons in the Control
Panel Lock setting in the projector's Management menu or use the remote
control to turn on the projector.
•
If the projector does not respond when you press any buttons on the
projector, an internal error may have occurred in the projector. Contact
Epson for help.
•
Adjust the Brightness setting in the projector's Image menu for individual
image colors.
•
Adjust the brightness of your projector's light source.
s Operation > Light Source Brightness Control
•
Make sure the Messages setting is set to On in the projector's Display menu.
•
e projector may not be able to project copyrighted videos that you play
back on a computer. For more details, see the manual supplied with the
computer.
•
For images projected with Windows Media Center, reduce the screen size
from full screen mode.
•
For images projected from applications using Windows DirectX, turn o
DirectX functions.
g
Related Links
•
"Unlocking the Projector's Buttons" p.134
•
"Projector Administration Settings - Management Menu" p.204
•
"Input Signal Settings - Signal I/O Menu" p.192
•
"Image Quality Settings - Image Menu" p.190
•
"Projector Feature Settings - Operation Menu" p.200
•
"Projector Display Settings - Display Menu" p.198
Solving Image or Sound Problems
247
To Next Page
Loading...
Need help?
General
