Epson EB-810E - Setting the Projector ID; Selecting the Projector You Want to Operate; Using Multiple Projectors

Setting the Projector ID
To con
trol multiple projectors from a remote control, give each projector a
unique ID.
a
Press the [Menu] button, select the Mul
ti-Projection menu, and press
[Enter].
b
Select Projector ID and press [Enter].
c
Us
e the arrow buttons to select the identic
ation number you want to use
for the projector. en press [Enter].
d
Press [Menu] or [Esc] to exit the menus.
e
Repeat these steps for all the other projectors you want to operate from
o
ne r
emote control.
Selecting the Projector You want to Operate
Aer s
etting the projector's ID, select the ID for the projector you want to
operate using the remote control.
Using Multiple Projectors
118