When multiple image sources are connected to the projector, such as a
comp
uter and DVD player, you can switch from one image source to the other.
a
Make sure the connected image source you want to use is turned on.
b
For video image sources, insert a DVD or other video media and press
p
lay
.
c
Do one of the following:
•
P
res
s the [Source] button on the control panel or the [Source Search]
button on the remote control until you see the image from the source
you want.
is screen is displayed when no image signal is detected. Check
th
e cable connections between the projector and image source.
Selecting an Image Source
73
To Next Page
Loading...
