•
Pres
s the button for the source you want on the remote control. If there
is more than one port for that source, press the button again to cycle
through the sources.
A
HDMI and HDBaseT sources (HDMI1, HDMI2, and HDBaseT ports)
B
USB port sources (USB-B port and external devices connected to the
USB-A ports)
C
Network source (LAN and Screen Mirroring)
•
Pres
s the [Home] button on the control panel or remote control.
en select the source you want to use from the screen displayed.
•
e disp
lay order of the input sources changes when the
projector detects an input signal. (e detected input source
appears in the upper le position.)
•
A check mark appears on the image from the current input
source. You can check a preview of the current input image for
most sources as a thumbnail (other than the USB input source
in Content Playback mode).
Selecting an Image Source
74
To Next Page
Loading...
