Solutions When Image is Incorrect Using the USB
Display Func
tion
If no image appears or if the image appears incorrectly using the USB Display
func
tion, try the following solutions:
•
Press the [USB] button on the remote control.
•
Disconnect the USB cable, and reconnect it.
•
Make sure the Epson USB Display soware has been installed correctly.
Depending on your OS or computer settings, the soware may not have been
installed automatically. Download the latest soware from the following Web
site and install it.
epson.sn
•
For Mac, select the USB Display icon in the Dock folder. If the icon does not
appear on the Dock, double-click USB Display in the Applications folder.
If you select Exit from the USB Display icon menu on the Dock, USB
Display does not start automatically when you connect the USB cable.
•
If the mouse cursor ickers, select Make the movement of the mouse
pointer smooth in the Epson USB Display Settings program on your
computer.
•
Turn o the Transfer layered window setting in the Epson USB Display
Settings program on your computer.
•
If you change the computer resolution during projection, the performance
and quality of the video may decline.
•
For images projected with Windows Media Center, reduce the screen size
from full screen mode.
•
For images projected from applications using Windows DirectX, turn o
DirectX functions.
g
Related Links
•
"Connecting to a Computer for USB Video and Audio" p.33
Solutions When "No Signal" Message Appears
If the No Signal message appears, try the following solutions:
•
Pr
ess the [Source] button on the control panel or the [Source Search] button
on the remote control and wait a few seconds for an image to appear.
•
Turn on the connected computer or video source, and press play to begin
your presentation, if necessary.
•
Check that all cables required for projection are securely connected.
•
If you are projecting from a laptop computer, make sure it is set up to display
on an external monitor.
•
If necessary, turn o the projector and the connected computer or video
source, and then turn them back on.
•
If you are projecting from an HDMI source, replace the HDMI cable with the
shorter one.
g
Related Links
•
"Displaying From a Windows Laptop" p.248
•
"Displaying From a Mac Laptop" p.249
Displaying From a Windows Laptop
If th
e message No Signal is displayed when projecting from a laptop, you need
to set up the Windows laptop to display on an external monitor.
a
Hold down the Windows key and press P on yo
ur keyboard at the same
time, then click Duplicate.
b
If the same image is not displayed by the laptop and projector, check
the W
indows Display utility to make sure the external monitor port is
enabled and extended desktop mode is disabled.
Solving Image or Sound Problems
248
To Next Page
Loading...
