Epson EB-810E - Connection Methods for Wireless Network Projection; Installing the Wireless LAN Module

Connection Methods for Wireless Network Projection
Choose a connection method for connecting your computer and projector over
a netw
ork based on your network environment.
•
Simple AP mode lets you directly connect to smartphones, tablets, or
computers using your projector as an access point. When you use this
method, connect the projector using Quick Connection Mode of the Epson
iProjection soware or use Screen Mirroring.
•
Infras
tructure mode lets you connect to smartphones, tablets, or computers
over a wireless network access point. When you use this method, connect
the projector using Advanced Connection Mode of the Epson iProjection
soware.
When monitoring or controlling the projector using wireless LAN in
stan
dby mode, connect your computer and projector with infrastructure
mode.
Your projector has built-in wireless LAN modules. If you install an additional
o
p
t
ional wireless LAN module, you can use both network connection methods
at the same time. When you install the wireless LAN module, set the Simple AP
setting to On.
s Network > Network Settings > Simple AP
Installing the Wireless LAN Module
To use the additional wireless connections, install the Epson wireless LAN
module. Do not install any other type of wireless LAN module.
Wireless Network Projection
142