Epson EB-810E - Modifying the Black Level Adjustment Area

e
Adjust the black tone.
You can use the Brigh
tness buttons to adjust the RGB values at the same
time.
f
Repeat steps 4 and 5 as needed to adjust any remaining screen areas.
g
When you are ni
sh
ed, press [Menu].
g
Related Links
•
"Modifying the Black Level Adjustment Area" p.127
Modifying the Black Level Adjustment Area
If th
ere are areas where the color does not match aer adjusting the Black Level
setting, you can adjust them individually.
a
Select A
rea Correction in the Black Level setting and press [Enter].
b
Se
lect Start Adjustments and press [Enter].
Bo
undary lines indicating where images overlap are displayed. e lines
are displayed based on the Edge Blending setting.
c
Use the arrow buttons to select the boundary line you want to adjust. en
pres
s [Enter].
e selected line is displayed in orange.
d
Use the arrow buttons to adjust the line position. en pres
s [Enter].
e
Use the arrow buttons to select the point you want to move. en pres
s
[Enter].
e selected point is displayed in orange.
You can change the number of the displayed points using the Poin
ts
setting.
Using Multiple Projectors
127