a
Press the [Menu] button, select the Mul
ti-Projection menu, and press
[Enter].
b
Select Black Level and press [Enter].
c
Select Color Adjustment and press [Enter].
e ad
justment areas are displayed based on the Edge Blending setting.
d
Use the arrow buttons to select the area you want to adjust and press
[En
ter].
e
selected area is displayed in orange.
When multiple screens are overlapping, adjust based on the area
wit
h the most overlap (the brightest area). In the illustration below,
rst align (2) with (1), and then adjust so that (3) aligns with (2).
Using Multiple Projectors
126
To Next Page
Loading...
