Epson EB-810E - Using Multiple Projectors; Projector Identification System for Multiple Projector Control

You can combine the projected images from two or more projectors to create
one
unied image area. (Multi-Projection)
•
Befo
re starting projection, make sure you set the Color Mode setting
to Multi-Projection in the projector's Image menu for all of the
projectors.
•
In some cases the brightness and color tone may not match completely
even aer correction.
•
If brightness and color tone dierences become more noticeable over
time, repeat the adjustments.
For best results, select settings and adjustments for multiple projector images in
this o
rder:
•
Setting the Projector ID
•
Adjusting Color Uniformity
•
Blending the Image Edges
•
Matching the Image Colors
•
Adjusting the Black Level
•
Adjusting RGBCMY
•
Scaling an Image
We recommend adjusting the image at least 30 minutes aer you s
tart
projecting, because images are not stable right aer turning on the
projector.
g
Related Links
•
"Pr
ojector Identication System for Multiple Projector Control" p.117
•
"Adjusting Color Uniformity" p.119
•
"Tiling Images into One Image" p.121
•
"Blending the Image Edges" p.122
•
"Matching the Image Colors" p.124
•
"Adjusting the Black Level" p.125
•
"Adjusting RGBCMY" p.128
•
"Scaling an Image" p.128
Projector Identication System for Multiple Projector
Control
When lining up multiple projectors to project images, you can correct the
brig
htness and color tone of each projector's image so that the images match
closely.
You can set a unique projector ID for each projector to operate them
individually using a remote control, and then correct the brightness and color
for each projector.
g
Related Links
•
"Setting the Projector ID" p.118
•
"Selecting the Projector You want to Operate" p.118
Using Multiple Projectors
117