Connecting to an HDMI Video Source
If yo
ur video source has an HDMI port, you can connect it to the projector
using an HDMI cable and send the image source's audio with the projected
image.
Attention
Do no
t turn on the video source before connecting it to the projector. Doing so could
damage the projector.
a
Connect the HDMI cable to your video source's HDMI output port.
b
Connect the other end to the projector's HDMI port.
Connecting to External USB Devices
Follow the instructions in these sections to connect external USB devices to the
pro
jector.
g
Related Links
•
"USB Device Projection" p.35
•
"Connecting to a USB Device" p.35
•
"Disconnecting a USB Device" p.36
USB Device Projection
You c
an project images and other content without using a computer or video
device by connecting any of these devices to your projector:
•
USB ash drive
•
Digital camera or smartphone
•
USB hard drive
•
Digit
al cameras or smartphones must be USB-mounted devices, not
TWAIN-compliant devices, and must be USB Mass Storage Class-
compliant.
•
USB hard drives must meet these requirements:
•
USB Mass Storage Class-compliant (not all USB Mass Storage Class
devices are supported)
•
Formatted in FAT16/32
•
Self-powered by their own AC power supplies (bus-powered hard
drives are not recommended)
•
Avoid using hard drives with multiple partitions
You can also project playlists that contain images and movies saved on a USB
ash dr
ive in Content Playback mode.
g
Related Links
•
"Projecting a PC Free Presentation" p.97
•
"Projecting in Content Playback Mode" p.103
Connecting to a USB Device
You c
an connect your USB device to the projector's USB-A port and use it to
project images and other content.
Projector Connections
35
To Next Page
Loading...
