Regular lter maintenance is important to maintain your projector. Clean
th
e air lter when a message appears telling you the temperature inside the
projector has reached a high level. It is recommended that you clean these
parts over a 20,000 hour period. Clean them more oen than this if you use
the projector in an environment that is dustier than expected. (Assuming the
projector is used in an atmosphere in which airborne particulate matter is less
than 0.04 to 0.2 mg/m3.)
Attention
If regu
lar maintenance is not performed, your Epson projector will notify you when
the temperature inside the projector has reached a high level. Do not wait until this
warning appears to maintain your projector lter as prolonged exposure to high
temperatures may reduce the life of your projector.
g
Related Links
•
"Cleaning the Air Filter " p.232
•
"Replacing the Air Filter" p.234
•
"Cleaning the Air Intake Vents " p.235
Cleaning the Air Filter
You need to clean the projector's air lter
s in the following situations:
•
e lter get dusty.
•
You see a message telling you to clean it.
a
Turn o the projector and unplug the power cord.
b
Car
efully remove the front cover xing p
oints on the le and right side of
the cover.
c
Remove the front cover.
Air Filter and Vent Maintenance
232
To Next Page
Loading...
