e projector can display images in dierent width-to-height ratios called
asp
ect ratios. Normally, the input signal from your video source determines
the image's aspect ratio.
If you always want to use a particular aspect ratio for a certain video input
source, you can select it using the projector's Image menu.
g
Related Links
•
"Changing the Image Aspect Ratio" p.75
•
"Available Image Aspect Ratios" p.75
Changing the Image Aspect Ratio
You can change the aspect ratio of the displayed image.
•
Set th
e Screen Type setting in the projector's Installation menu before
changing the aspect ratio.
•
Available only when the following conditions are met:
•
e Scale setting is turned o or the Scale Mode setting is set to Full
Display.
s Image > Scale > Scale Mode
•
e current source is HDMI, HDBaseT, or USB and document
camera.
a
Turn on the projector and switch to the image source you want to use.
b
Press the [Aspect] button on the remote control.
e shape and size of the displayed image changes, and the name of the
asp
ect ratio appears briey on the screen.
c
To cycle through the available aspect ratios for your input signal, press the
[Asp
ect] button repeatedly.
•
e availab
le aspect ratio setting varies depending on the input signal.
•
If there are margins between the edge of the image and the projected
screen frame, you can adjust the position of the image using the Screen
Position setting in the projector's Installation menu.
s Installation > Screen Type > Screen Position
Available Image Aspect Ratios
You can select the following image aspect ratios, depending on the selected
Scre
en Type setting and the input signal from your image source.
•
Note that using the aspect ratio function of the projector to reduce,
enlarge, or split the projected image for commercial purposes or for
public viewing may infringe upon the rights of the copyright holder of
that image based on copyright law.
•
When projecting images from an Epson document camera connected
by USB, you can select only Auto, H-Zoom, and V-Zoom.
Image Aspect Ratio
75
To Next Page
Loading...
Need help?
General
