You can schedule up to 30 events to occur automatically on your projector, such
as turnin
g the projector on or o or switching the input source. e projector
performs the selected events on the spe cied date and time in the schedule you
set up.
Warning
Do no
t place ammable objects in front of the lens. If you schedule the projector to
turn on automatically, ammable objects in front of the lens could catch on a re.
•
If yo
u set a Menu Protection of Schedule to On, turn it o rst.
•
Light Source Calibration does not start if the projector is not used
continuously for more than 20 minutes, or regularly turned o by
shutting o the power outlet. Set Light Source Calibration events to
occur only aer 100 hours of usage.
a
Set the date and time in the Date & T
ime menu in the projector's
Management menu.
b
Press the [Menu] button, select the M
anage
me
nt menu, and press [Enter].
c
Select Schedule Settings and press [Enter].
d
Se
lect Schedule and press [Enter].
e
Se
lect A
dd New and press [Enter].
Setting Projector Event Schedules
184
To Next Page
Loading...
