Epson EB-810E - Input Signal Settings - Signal I;O Menu

Normally the projector automatically detects and optimizes the input signal
sett
ings. If you need to customize the settings, you can use the Signal I/O menu.
e available settings depend on the currently selected input source.
Setting Options Description
Volume Various levels
availab
le for each
source
Adjusts the volume of projector’s speaker
system.
You can also adjust the volume of external
speakers.
Setting is only displayed when the audio
is not output to AV system.
Setting Options Description
Sound Mode HDMI1
HDMI2
HDB
aseT
USB Display
USB
LAN
Screen Mirroring1
Screen Mirroring2
Select your favorite mode for sound
output from the projector's speaker
system according to the playback
contents.
Source — Displays settings saved for each input
sour
ce.
To change settings for an input source,
make sure the source is connected and
select that source.
Signal Format Video Range Sets the video range to match the setting
of inp
ut source.
Setting is only displayed when the current
source is HDMI or HDBaseT.
Color Space Auto
BT.709
B
T.2020
Sets the conversion system for the color
space.
Setting is only displayed in the following
cases:
•
Color Mode is not set to DICOM
SIM.
•
e current source is HDMI or
HDBaseT.
Input Signal Settings - Signal I/O Menu
192