To save the current shape of an image you have adjusted, select Save
M
emory. You can save up to three image shapes in the memory.
s Installation > Geometry Correction > Memory > Save Memory
Correcting Image Shape with Arc Correction
You can use the projector's A
r
c C
orrection setting to adjust the shape of an
image projected on a curved or spherical surface.
If you change the S
cr
e
en Type and Screen Position settings, the
adjustments are reset.
a
Turn on the projector and display an image.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Installation menu and press [Enter].
d
Select Geometry Correction and press [Enter].
Image Shape
65
To Next Page
Loading...
