Epson EB-810E - Controlling a Networked Projector Using a Web Browser

Once you have connected your projector to your network, you can select
pro
jector settings and control projection using a compatible Web browser. is
lets you access the projector remotely.
In Content Playback mode, you can also edit playlists.
Attention
In Co
ntent Playback mode, do not remove the USB ash drive from the projector or
disconnect the projector's power cord in the following situations. Data saved on the
USB ash drive may be damaged.
•
When the Playlists screen is displayed
•
When the USB Memory Device screen is displayed
•
Make s
ure the computer and projector are connected to the network.
If you are connecting wirelessly, connect to devices over a wireless
network access point.
•
You can use the following Web browsers.
•
Microso Edge (Windows)
•
Safari (Mac, iOS)
•
Chrome (Android)
•
While using the Web browser, do not connect using a proxy server. You
cannot select all of the projector menu settings or control all projector
functions using a Web browser.
•
If you set the Standby Mode setting to Communication On in the
projector's Operation menu, you can use a Web browser to select
settings and control projection even if the projector is in standby mode
(when the power is o).
•
You can also control the projector using a Web browser through the
Epson iProjection (iOS/Android) app.
a
Make sure the projector is turned on.
b
Make sure your computer or device is connected to the same network as
t
he p
rojector.
c
Start your Web browser on the computer or device.
d
Go to the E
pson Web Control screen by entering the projector's IP
addres
s into the browser's address box. When entering an IPv6 address,
wrap the address with [ and ].
You see the Epson Web Control screen.
Controlling a Networked Projector Using a Web Browser
166