Epson EB-810E - Setting Frame Interpolation

You can use the projector's Frame I
nterpolation feature to smooth fast-moving
video by comparing consecutive image frames and inserting an intermediate
image frame between them.
Frame Interpolation is available in these conditions:
•
is s
etting is available when using one of the following input sources:
•
HDMI1
•
HDMI2
•
HDBaseT
•
Edge Blending is set to O in the projector's Multi-Projection menu.
a
Turn on the projector and switch to the image source you want to use.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Image menu and press [Enter].
d
Select Frame Interpolation and press [Enter].
e
Select the level of interpolation and press [Enter].
f
Press [Menu] or [Esc] to exit the menus.
Setting Frame Interpolation
80