Epson EB-810E - Setting up Wireless Network Security for Infrastructure Mode

c
Select Passphrase, press [Enter], and enter a passphrase from 8 to 63
ch
aracters long.
d
When you ni
s
h
entering a passphrase, go back to the Network Settings
screen, select Set, and follow the on-screen instructions to save your
settings and exit the menus.
Setting Up Wireless Network Security for
Infrastructure Mode
You can set up security for your projector to use on a wireless network with
infrast
ructure mode. Set up one of the following security types to match the
settings used on your network:
•
WPA3-PSK security
•
WPA2/WPA3-PSK security
•
WPA3-EAP security
•
WPA2/WPA3-EAP security
Contact your network administrator for guidance on entering the correct
infor
mation.
a
If you want to set up WPA3-EAP or WPA2/WPA3-EAP security, make
sure your digital certicate le is compatible with projector registration
type and placed directly on a USB storage device.
b
Press the [Menu] button, select the Net
work menu, and press [Enter].
c
Select Network Settings and press [Enter].
d
Se
lect the Wireless LAN menu and press [Enter].
e
Select the S
ecurity setting and press [Enter].
Wireless Network Projection
148