Epson EB-810E - Page 149

f
Select the security settings to match your network settings.
g
Do one of the following according to the security you selected.
•
WP
A3-PS
K
or WPA2/WPA3-PSK: Select Passphrase, press [Enter],
and enter a passphrase from 8 to 63 characters long. en go to step 16.
•
WPA3-EAP or WPA2/WPA3-EAP: Select EAP Type and press [Enter].
h
Select the protocol for authentication as the EAP Typ
e setting.
i
To import your certic
ate, select the certicate type and press [Enter].
•
Client Certicate for the PEAP-TLS or EAP-TLS type
•
CA certicate for all EAP types
You can also register the digital certic
ates using your Web browser.
However, be sure to register just once or the certicate may not
install correctly.
j
Select Save and press [Enter].
k
Fo
llow the on-screen instructions to connect a USB storage device to the
pro
jector's USB-A port.
l
Press [Enter] to display the certic
ate list.
m
Select the certic
ate to import using the displayed list.
A message is displayed prompting you to enter the password for the
certicate.
n
Enter a password and press [Enter].
e certic
ate is imported and a completion message appears.
o
Select your EAP settings as necessary.
•
Use
r name lets you enter a user name using up to 64 alphanumeric
characters. When importing a client certicate, the name the certicate
was issued to is automatically set.
•
Password lets you enter a password using up to 64 alphanumeric
characters for authentication when using the PEAP or EAP-FAST type.
•
Verify Server Certicate lets you select whether or not to verify the
server certicate when a CA certicate has been set.
•
RADIUS Server Name lets you enter the server name to be veried.
p
When you ni
s
h
making settings, go back to the Network Settings screen,
select Set, and follow the on-screen instructions to save your settings and
exit the menus.
Wireless Network Projection
149