Epson EB-810E - Cleaning the Air Intake Vents

d
Slide the air lter
cover latch and pull out the air lter cover.
e
Pull the air l
ter
out of the projector.
Dispose of used air lter
s according to local regulations.
•
Filter frame: Polypropylene
•
Filter: Polypropylene, PET
f
Place the new air lter
with the four tabs facing down as shown.
Attention
Do no
t force the air lter cover to close with the tabs on the air lter facing up.
Doing so could damage the projector.
g
Insert the air lter
cover until it clicks into place.
h
Replace the front cover.
Cleaning the Air Intake Vents
Clean the projector's air intake vents periodically, or whenever you notice dust
on th
e surface of the vents to prevent the projector from overheating due to
blocked ventilation.
a
Turn o the projector and unplug the power cord.
b
Tur
n the projector upside down.
Air Filter and Vent Maintenance
235