Epson EB-810E - Projection Modes; Changing the Projection Mode Using the Remote Control; Changing the Projection Mode Using the Menus

Depending on how you positioned the projector, you may need to change the
pro
jection mode so your images project correctly.
•
Front lets you project from a table in front of the screen.
•
Front/Upside Down ips the image over top-to-bottom to project upside-
down from a wall mount or ceiling.
•
Rear ips the image horizontally to project from behind a translucent screen.
•
Rear/Upside Down ips the image over top-to-bottom and horizontally to
project from a wall mount or ceiling and behind a translucent screen.
g
Related Links
•
"Changing the Projection Mode Using the Remote Control" p.52
•
"Changing the Projection Mode Using the Menus" p.52
•
"Projector Setup and Installation Options" p.25
Changing the Projection Mode Using the Remote
Control
You can change the projection mode to ip the image over top-to-bottom.
a
Turn on the projector and display an image.
b
Hold down the [A/V Mute] button on the remote control for 5 seconds.
e image disappears briey and reappears ipped top-to-bottom.
c
To c
hange projection back to the original mode, hold down the [A/V
Mut
e] button for 5 seconds again.
Changing the Projection Mode Using the Menus
You can change the projection mode to ip t
he image over top-to-bottom
and/or le-to-right using the projector menus.
a
Turn on the projector and display an image.
b
Press the [Menu] button on the control panel or remote control.
Projection Modes
52