Epson EB-810E - Receiving Shared Screen Images

a
Press the [Home] button.
b
Select S
creen Sharing.
c
Select the projector you want to disconnect and select Disco
nnect.
e selected projector is disconnected and screen sharing nishes to this
pr
ojector.
d
Repeat step 3 as needed to disconnect to more projectors.
When you select Disco
nnect All, the button changes to Conrm. Select
the button again to disconnect all projectors.
Receiving Shared Screen Images
Before receiving the screen, you need to select settings on your projector.
•
Conn
ect the projectors to the same network as the projector that is sharing
images.
•
Make sure that no other device is connecting to the projector using the Epson
iProjection soware.
•
Make sure the Screen Sharing setting is set to On.
s Network > Network Settings > Network Projection > Screen Sharing
When the other projector starts sharing screen, the shared screen image is
automatically displayed.
If not, press the [LAN] button on the remote control.
To remove the shared image during projection, press the [Esc] button.
If you do not have the IP address for your projector, press the [Home]
but
ton and select Screen Sharing. You can check the IP address displayed
on the guide screen.
Screen Sharing
163