Epson EB-810E - Registering Digital Certificates from a Web Browser

You can register the digital certic
ates on the projector to provide security for
your presentation les.
You can also register the digital certic
ates in the projector's Network
menu. However, be sure to register just once or the certicate may not
install correctly.
s Network > Network Settings > Wireless LAN > Client C erticate
s Network > Network Settings > Wireless LAN > CA certicate
s Network > Network Settings > Projector Control > Secure HTTP >
Web Server Certicate
a
Make sure your digital certic
ate le is compatible with projector
registration.
b
Make sure the projector is turned on.
c
Start your Web browser on a computer or device connected to the
n
etw
ork.
d
Go to the Epson Web Control screen by entering the projector's IP address
in
t
o t
he browser's address box.
e
Select Advanced.
•
You m
ay need to log in before the Advanced screen is displayed.
If you see a log in window, enter your user name and password.
(e user name is EPSONWEB. No password is set by default. If
no Web Control Password has been set, a browser error screen is
displayed. Set the password in the Network Settings menu.)
•
You can change the password in the projector's Network menu.
s Network > Network Settings > Web Control Password
f
Select to open the menus, select Net
work, and select Certicate.
g
Select the certic
ate le you want to register.
h
Enter the password in the Passw
ord box, and then click Send.
i
When you nish
registering the certicate, click Apply to nalize your
changes and complete the registration.
Registering Digital Certic
ates from a Web Browser
175