Setting Options Description
DNS Server 1
DNS Ser
ver 2
Various IP
addresses
Enter the IP address for the DNS server,
using 0 to 255 for each address eld. e
DNS server resolves the host name. You
cannot use the following IP addresses:
127.x.x.x (where x is a number from 0 to
255).
When these settings are not set
and remain as 0.0.0.0, DNS server
information is acquired using DHCP.
Aer acquiring the information, the
values remain as 0.0.0.0.
IPv6 On
O
Set to On if you wan
t to connect the
projector to the network using IPv6.
IPv6 is supported to monitor and control
the projector over a network using Epson
Web Control and PJLink.
Auto Conguration On
O
Set t
o On to assign addresses
automatically according to the Router
Advertisement.
Use Temporary
Addres
s
On
O
Set to On if you want to use a temporary
IPv6 address.
IP Address Display On
O
Set to On to display the IP address on the
net
work information screen and Home
screen.
Network Menu - Mail N
otic
ation
Menu
Settings on the Mail Notication menu let you receive an email notication if a
problem or warning occurs in the projector.
Setting Options Description
Mail Notication On
O
Set t
o On to send an email to the preset
addresses when a problem or warning
occurs with a projector.
SMTP Server Various IP
address
es
Enter the IP address for the projector's
SMTP server using 0 to 255 for each
address eld.
Do not use these addresses:
127.x.x.x, 192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255).
Authentication Open
Aut
h
SSL
TLS
Select the authentication type of the
SMTP server.
Port Number 1 to 65535 (default
is 25)
Ent
er a number for the SMTP server Port
Number.
User Name Up to 64
alph
anumeric
characters
Enter a user name for the SMTP server.
Password Up to 64
alph
anumeric
characters
Enter a password for authentication on
the SMTP server.
From Up to 64
alph
anumeric
characters
(do not use " ( ) , : ;
< > [ \] spaces)
Enter the email address of the sender.
Address 1 Setting
Addres
s 2 Setting
Address 3 Setting
Enter the e-mail address, and select the
alerts you want to receive.
Projector Network Settings - Network Menu
213