You can use the Scre
en Type setting to match the aspect ratio of the displayed
image to the screen you are using.
•
You c
annot change the Screen Type setting when the Content
Playback setting is set to On in the projector's Operation menu.
•
If you change the Screen Type setting, the Geometry Correction
settings are initialized.
a
Turn on the projector and display an image.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Installation menu and press [Enter].
d
Select Screen Type and press [Enter].
e
Se
lect your screen's aspect ratio and press [Enter].
Setting the Screen Type
54
To Next Page
Loading...
