You can invert the audio's le and rig
ht channels to match the projector
installation position.
a
Turn on the projector and start a presentation.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Signal I/O menu and press [Enter].
d
Select Inverse Audio and press [Enter].
e
Se
lect setting according to the installation position and press [Enter].
•
When t
he projector is mounted to the wall or ceiling, set to On.
•
When the projector is placed on a table, set to O.
f
Press [Menu] or [Esc] to exit the menus.
Inverting the Audio Channels
93
To Next Page
Loading...
