Indicator and status Problem and solutions
Power: Flashing blue
Stat
us: Indicator status
varies
Laser: Indicator status
varies
Temp: Indicator status
varies
Low air ow through the air lter.
•
Make sure that the vents and air lter are not clogged
with dust or obstructed by nearby objects.
•
Clean or replace the air lter.
•
If the problem persists, unplug the projector and
contact Epson for help.
Power: O
Stat
us: Flashing blue
Laser: O
Temp: O
Low air ow through the projector.
•
Make sure that the vents and air lter are not clogged
with dust or obstructed by nearby objects.
•
Clean or replace the air lter.
•
If the problem persists, unplug the projector and
contact Epson for help.
Power: Indicator status
varies
St
atus: Indicator status
varies
Laser: Flashing orange
Temp: Indicator status
varies
e projector is unable to maintain constant brightness
and the setting is disabled.
s Settings > Brightness Settings > Constant
Brightness
Wireless LAN status
Wireless LAN indicator
stat
us
Problem and solutions
Lit blue Wireless LAN is available.
Flashing blue (quickly) Connecting to a device.
Flashing blue (slowly) An error has occurred. Turn o t
he projector and then on
again.
Wireless LAN indicator
stat
us
Problem and solutions
O Wireless LAN is not available. Make sure the Wire
less
LAN Power setting is set to On in the projector's
Management menu.
g
Related Links
•
"Projector Administration Settings - Management Menu" p.204
•
"Cleaning the Air Filter " p.232
•
"Replacing the Air Filter" p.234
Projector Indicator Status
246
To Next Page
Loading...
