Press the arrow buttons on the control panel or remote control to select a menu
item, an
d then press [Enter].
A
Selects the source you want to project.
A che
ck mark appears on the upper right of the current input source.
You can check a preview of the current input image for most sources as a
thumbnail (other than the USB input source in Content Playback mode).
B
Projects images from two dierent image sources simultaneously in a grid format.
C
Shares your projected screen image with other projectors connected to the same
network.
D
Displays the connection guide. You can select the wireless connection methods
according to the devices you are using, such as smartphones or computers.
E
Lets you select the following common projector settings (settings may vary
dep
en
din
g on other selected settings):
•
Color Mode
•
Brightness Level
•
Volume
•
Geometry Correction (Quick Corner is available.)
•
Aspect
•
Install Again
e Geometry Correction setting is only displayed when Fixed
Ins
tallation is set to O and Geometry Correction is set to Quick
Corner in the projector's Installation menu.
F
Displays the projector name and the projector keyword.
G
Displays the current time.
e Home screen disappears aer 10 minutes of inactivity.
g
Related Links
•
"Projecting Two Images Simultaneously" p.95
•
"Screen Sharing" p.161
Turning On the Projector
46
To Next Page
Loading...
