e
Check the displayed image, and then select Yes t
o save it as the user's logo.
e user's logo is overwritten and a completion message is displayed.
f
Press [Esc] to exit the message screen.
g
Select the Dis
pl
ay menu and press [Enter].
h
Select when you want to display the User's Logo screen:
•
T
o dis
play it whenever there is no input signal, select No-signal Screen
and set it to Logo.
•
To display it whenever you turn the projector on, select Startup Screen
and set it to On.
To prevent changes to the U
s
e
r's Logo settings, turn on Menu Protection
for the User's Logo setting and set the password.
g
Related Links
•
"Se
lecting Password Security Types" p.132
Saving a User's Logo Image
113
To Next Page
Loading...
