Epson EB-810E - Page 170

Advanced
e Advance
d screen allow you to select the projector's settings.
A
Opens the menus.
B
Displays the menu name you selected.
C
Species the projector settings. (e available settings vary depending on your
pr
ojector model.)
D
Locks/unlocks the projector settings.
Locking prevents accidental changes to the Epson Web Control settings.
E
Updates the projector settings.
You cannot change the following settings using Epson Web Control.
•
HDMI Lin
k
•
Fixed Installation
•
Setting Plate Installation Guide
•
Image Shi
•
Install Again
•
Content Playback
•
User's Logo
•
User Pattern
•
Wireless LAN Diagnosis
•
Language
•
Display Status
•
Art-Net Channel Information
•
Search Access Point
•
Start Pairing
•
Event ID
•
Antenna Level
•
Reset Network Settings
•
Firmware Update
You can select the following settings only with Epson Web Control.
•
Init
ial Setting
•
Monitor Password (up to 16 alphanumeric characters)
When performing command communication for the rst time, you
must set a password in the web browser.
•
IPv6 Settings (manual)
•
HTTP port (port number used for Web Control except for 80 [default],
843, 3620, 3621, 3625, 3629, 4352, 4649, 5357, 10000, 10001, 41794)
•
Display Logs
Controlling a Networked Projector Using a Web Browser
170