e
When you nish
selecting settings, go back to the Network Settings
screen, select Set, and follow the on-screen instructions to save your
settings and exit the menus.
f
Turn o the projector, and then turn it on again to enable the setting.
g
St
art your Web browser on a computer or device connected to the
netw
ork.
h
Go to the Epson Web Control screen by entering the projector's IP address
into t
he browser's address box.
i
Select the Crestron Connected settings. See the Crestron Web site for
detai
ls.
Crestron Connected Support
182
To Next Page
Loading...
