Setting Options Description
HDMI Link Device
Conn
ections
Lists the devices connected to the HDMI
ports.
Setting is only displayed when HDMI
Link is set to On.
HDMI Link Set to On to enable the HDMI Link
fe
atures.
Audio Out Device Selects whether to output audio from the
inter
nal speakers or a connected audio/
video system.
Power On Link Controls what happens when you turn on
the p
rojector or connected device.
•
Bidirectional: automatically turns on
the connected device when you turn
on the projector, and vice versa.
•
Device -> PJ: automatically turns on
the projector when you turn on the
connected device.
•
PJ -> Device: automatically turns on
the connected device when you turn
on the projector.
Power O Link Controls whether connected devices are
turn
ed o when you turn o the
projector.
HDMI Out Power
Link
T
urns on or o devices connected to
the HDMI Out port when you turn the
projector on or o.
HDMI Out
Termin
al End
Selects whether to use the projector as the
end projector.
Setting Options Description
HDBaseT Control
Comm
unications
Enables or disables communication
from the Ethernet and serial ports on
the HDBaseT transmitter or switcher;
turning on this setting disables the
projector's LAN and RS-232C ports.
Setting is only displayed when Extron
XTP is set to O.
Extron XTP Set to On when you connect an Extron
XTP t
ransmitter or switcher to the
HDBaseT ports. See the following Extron
Web site for more details on the XTP
system.
http://www.extron.com/
Reset Signal I/O
Sett
ings
— Resets all adjustment values on the Signal
I/O menu to their default settings.
Input Signal Settings - Signal I/O Menu
194
To Next Page
Loading...
