Epson EB-810E - Page 205

Setting Options Description
Start Starts the refresh mode process to clear
any pr
ojected aerimage and turn o the
projector aer a specied period of time.
Press any button on the remote control to
cancel this process.
Light Source
Calib
ration
Run Now Starts light source calibration to optimize
the white balance of the currently
projected image. You may not be able
to start calibration if the projector's
environmental temperature is out of
range. (Wait 30 minutes aer turning on
the projector before starting calibration
for the best results.)
Run Periodically Set to On to perform light source
cali
bration periodically every 100 hours
of usage.
Last Run Displays the date and time of the last light
sour
ce calibration.
Date & Time Date & Time
Daylig
ht Saving
Time
Internet Time
Adjusts the projector's system time and
date settings. Select Daylight Saving
Time to set daylight saving time settings
for your region. Select Internet Time to
automatically acquire the time from an
Internet time server.
Schedule Settings — Schedules projector events to occur
auto
matically at selected dates and times.
Wireless LAN
Pow
er
On
O
Set to On to project images via a wireless
LAN. If you do not want to connect
via wireless LAN, turn it o to prevent
unauthorized access by others.
Setting Options Description
Wireless LAN
Diagn
osis
Ping
IP Address
Ping until stopped
Start
Transmits Ping to conrm
communication status.
Log Save
Dest
ination
Internal Memory
USB and Internal
Memory
Sets the location in which to save error
and operation log les.
Setting is only displayed when Content
Playback is set to O in the projector's
Operation menu.
Batch Setup Range All
Limit
ed
Select All to copy all of the projector
menu settings using the batch setup
feature. Select Limited, if you do not
want to copy the following settings:
•
Password Protection settings
•
EDID in the Signal I/O menu
•
Network menu settings
Language Various languages
availab
le
Select the language for projector menu
and message displays.
Information Various
infor
mation
Displays information about the projector
and input sources. e displayed items
vary depending on the current input
source.
Display Status System
Versio
n
Network Wired
Network Wireless
Input Signal
Output Signal
Displays the projector's status
information.
Projector Administration Settings - Management Menu
205