Epson EB-810E - Page 238

g
Select one of the following options:
•
Sele
ct Shi the whole panel to adjust the entire panel at the same time
and go to the next step.
•
Select Adjust the four corners to adjust the corners of the panel one at
a time and go to step 10.
h
Use the arrow buttons on the remote control to adjust the color alignment
sele
cted in Select Color, and then press [Enter].
Adjustment aects
the grid lines in the entire screen.
i
Select one of the following options:
•
S
ele
ct Adjust the four corners to ne-tune your adjustments.
•
Select Exit to nish adjustments.
j
Use the arrow buttons on the remote control to adjust the color alignment
o
f t
h
e screen corner highlighted by the orange box, and then press [Enter].
k
When you are nish
ed adjusting each corner of the screen, press [Enter].
l
Select one of the following options:
•
If yo
ur projector needs additional panel alignment, select Select
intersection and adjust. Use the arrow buttons on the remote control
to highlight the corner of any misaligned box on the screen, press
[Enter], make any necessary adjustments, and then press [Enter] again.
Repeat this step as necessary for the other intersections.
•
Select Exit to nish adjustments.
Adjusting the Color Convergence (Panel Alignment)
238