ETC Element - About Park; Park Display; Parked Values in Live

292 Eos Family v2.9.0 Operations Manual
Example:
To open the effects list press:
•
[Effect] [Effect]
Establish the number of the effect by pressing:
•
[Effect] [8] [Enter]
The CIA will repaint with unpopulated fields for the new effect. Assign the effect as
absolute by pressing:
•
<Type> {Absolute}
The effect will appear in the list and the CIA will repaint with the default entries for the
effect and an action chart for the effect. Define the first action by pressing:
•
{Action} [1] [Enter]
The action will populate the chart and will remain selected. You can also create a
range of actions at once, using the [Thru] button, if desired. Use the page keys to
navigate to the different columns
After arrowing to the “Time” column (or using the softkeys), specify the fade in time for
the actions.
•
[5] [Enter]
Page arrow to the Dwell column and enter a dwell time:
•
[5] [Enter]
Page arrow to the Level column and enter the desired referenced target:
•
[Color Palette] [5]
Page arrow down and a new action will be created. All fields default to the values in
the previous action. Page to the next action in the Level column and enter the
referenced target:
•
{Color Palette 8}
Page arrow down to the next action in the Level column and enter the referenced
target:
•
[Color Palette] [2]
Page arrow down to the next action in the Level column and enter the referenced
target:
•
{Color Palette 4}
Adjust any of the effect details on the right side of the CIA by pressing the appropriate
detail button and making changes (see Effects Editor (on page281) ).
Range for Level
You can apply a range of levels to the actions. You can either apply a range using the
percentage or by using a palette.